EBAC VA32 R (Right)
EBAC VA32 L (Left)
Description
The EBAC VA32 is a quality Uk manufactured MVHR unit with good controllability and provides a maximum flow rate of 245m3/hr suitable for a house up to 150 m2 floor area with up to 3 kitchens & bathrooms
Controllability is provided by a digital touch screen controller that comes complete with the unit and has internal humidity & Co2 sensors for demand-controlled ventilation
BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems,
KEY FEATURES – EBAC VA32
- Digital Touch Screen controller
- Smart control option
- Suitable for floor areas up to 172m2
- Delivers an airflow rate of up to 288 m³/hour @ 100 Pa
- High heat recovery efficiency of up to 88%.
- Internal humidity sensor for automatic speed control
- Internal Co2 and temperature sensors
- On demand control via optional room or duct sensor options
- Full 100% automatic summer bypass to supply unheated air in the summer
- 2 x G4 filters
- Galvanised steel casing with 32mm thermal insulation
- 5-year warranty* (Listed parts Only)
- 'A' energy rating
- Left hand right oriented models available
- Adjustable feet
- Sap Appendix Q (BRE) approved
- UK/CA marked
- Surge protected
Integral Humidity Sensor
The EBAC unit has an Internal Humidity sensor that can provide a superior demand-controlled ventilation solution for your property
When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit
We also advise an optional boost switch should be used local to the wet rooms
Filtration
2 x G4 filters are fitted to the unit that are easy and inexpensive to replace
CONTROL OPTIONS
The EBAC units are controlled by one of the following:
- Digital touchscreen Controller
- On-demand ventilation through built-in humidity & Co2 sensors
- Switched live signal from light / remote switches
Heat Exchanger
This unit has a high-quality PVC counterflow heat exchanger with up to a 88% thermal efficiency protected with high-capacity filters on each side
The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit
Frost Protection
In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed.
Frost protection will only activate after ten days of continuous run time.
Summer By-Pass
The EBAC units have a 100% summer by-Pass
If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature
Orientation
The EBAC VA32 units can be right or left-handed and correct orientation should be checked before purchase
Construction
Manufactured of double skin powder coated galvanised steel with a 32mm thermal insulation
Mounting
The units are wall mounted as standard and are supplied with a wall bracket
If floor mounting it is recommended to elevate the unit by 150mm to allow access to the condensation drain
The four feet are adjustable to allow for any uneven surface
Accessories
- EBAC VA32 Replacement filters - VA32-G4FILTER
