Complete kit of Mitsubishi MVHR unit and Ducting for commercial applications
Replaces the very popular LRG RX5-E range with improved efficiency and new 4 speed controller
Latest range from Mitsubishi with summer By-Pass and Digital controller
- Free hard wired digital control on ECH model
- Free Design Service*
- Free Technical Support
*free design service only available on agreed small commercial projects
- Horizontal installation
- Galvanised steel outer construction
- 4 Variable speeds
- Digital controller
- New improved DC Motors
- Paper counterflow heat recovery
- Very quiet operation
- Up to 86% Heat recovery
- 700 m3 h/r max flow
- 550 m3 h/r @ 200Pa
- SFP as llow as 0.33 wls
- 100% Summer Bypass
- 100% Adjustable air flow rates
- G3 filters
- Frost protection
- 2 Year Warranty
- 4 x 250 spigots
- Dimensions L/W/D (mm) 954 / 908 / 404
Suitable for numerous commercial applications that can include*
Application Guide Max Size Calculation* Office - - 12 office staff & nbsp; 8 l/s per person Classroom - - 12 students 8 l/s per person Shop / Retail - - 20 people or 70m2 5 l/s per or 5m2 of area Nursing Home - - 350 m2 0.5 ACH Nursery Crèche - - 50 m2 3 ACH M/P sports hall - - 11 occupants 10 l/s per person low activity Domestic Pool - - 75 m2 2 ACH
* calculations can differentiate depending on location always check with the local authority
Part Number Discription 4pt Kit 6pt kit 8pt kit C3004WP 300mm 4 Way with OBD and 200mm Plenum 8 P250M 250mm x 3 Meter Pipe 8 B90250M 250mm B90 Bend 20 C250M 250mm Male Connector 8 T250-200M 250mm to 200mm Tee 6 INS22ROLL 1.2 x 18meter foil backed glass fibre insulation 1 CLP250 250mm plenum with 300mm ex louvre with mesh 2 IFD250 10m roll 250mm insulated flexible ducting 2 ST50 Roll silver foil tape 6 BS50 Roll builders strap 10 meter 4 SE380 Sealant - grey duct 3 JC250 Jubilee clip 150-250mm (Pack of 10) 2 DS13 Box 1000 s/drill screws 12mm 1
- Technical Specification
Technical Specification tab
New Remote Controller
The design of the new PZ-61DR-E Lossnay controller has been unified with the PAR-31MAA air conditioning controller with a full-dot backlit LCD screen making it easy to see and use. Additionally the new controller has a vast range of added functionality allowing for flexibility on application and increased energy saving.
An example of this is the weekly timer function (shown below) which now allows all four fan speeds to be selected enabling optimised ventilation not just at different times of the day but also for different days of the week.
During summer nights the night purge function of the Lossnay units allows cooler fresh air to be brought into the building via the bypass damper, to reduce internal temperatures and cool the building fabric therefore reducing the load on the air conditioning system the next morning. This function on the new RVX units has been made more flexible whereby, it is now possible to select the operation start conditions, air volume and operation time to suit each application.
Auto ventilation mode, a function which automatically switches the Lossnay units between heat recovery mode and bypass mode dependent on indoor and outdoor conditions, has been made more flexible with the new RVX units. There are now two pre-defined factory settings that can be used for this function or a completely free setting allowing the conditions of bypass mode to be individually selected for each application.
The PCB of the new Lossnay RVX units has some added functionality allowing for more flexible control options. The connection of a third party pre / post-heater with operation functionality is now available. Additionally external fan speed control using 0-10V DC signal is possible across all four fan speeds allowing fan speed control using a third party CO2 sensor or a BEMS system.
- Download Documentation