Vent Axia Kinetic Plus B Right Handed Unit - 443028
Vent Axia Kinetic Plus B Left Handed Unit - 443028L
DIY Kit of a Vent Axia Kinetic Plus B MVHR unit and Quiet-Vent Semi Rigid Radial Ducting
Our Comprehensive DIY Kits have everything you should require to install a top quality Heat recovery system to building control regulations.
This kit can also be provided with different room sizes and ducting options if required (please contact us for a quotation)
This heat recovery unit and semi rigid radial ducting kit meets the highest and latest Building Regulation requirements and are suitable for newly constructed homes and renovation projects
Please call our sales team on 028 2827 5150 / +353 1526 7452 if you would like more information about upgrading your kit
The Lo-Carbon Sentinel Kinetic Plus B is the UKs bestselling heat recovery unit This top-quality unit has every conceivable option for control with proven durability and performance
Suitable for houses up to 260 m2 and meets the latest requirements of the Building Regulations ADF and ADL for whole house system ventilation:
Now available with Optional complete system using Quiet-Vent Semi Rigid radial ducting that provides a quiet and professional installation complying with all building control requirements.
2 x G4 with the option of a M5 pollen intake filter
The Lo-Carbon Sentinel Kinetic Plus B have 3 fully adjustable speeds and a purge setting (maximum flow). Provided with the unit is a digital controller that can be used to pre-set the speeds to any required airflow within the performance range
Boost can be achieved with almost any type of sensor or switch including momentary
The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperatur
The outer enclosure is constructed of PVC with the inner body being constructed of EPP
The unit has 2 x low energy, high efficiency EC/DC motors
Spigot Options The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom of the unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation
In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation.
|
Model |
Vent Axia Kinetic Plus B |
|
Heat Recovery efficiency % |
91% |
|
Digital Controller |
yes |
|
Boost Switch control |
Yes - Momentary |
|
Interactive control |
No |
|
Humidity control |
Internal and optional external sensor |
|
Airflow rate Max m3/h |
490 |
|
Airflow rate @ 100Pa m3/h |
425 |
|
Max dwelling size M2 |
260 (uk) |
|
Max room extraction |
Kitchen plus 7 extraction points |
|
Specific fan power (lowest) |
0.40 |
|
Dimensions W x H x D (mm) |
785 x 635 x 550 |
|
Weight |
24kg |
|
Filtration |
Yes 2 x G4 (optional 1x M5) |
|
Summer Bypass |
Yes |
|
Frost protection |
Yes |
|
Sound level @3m db.(a) |
22-49 |
|
Mounting |
wall - floor |
|
Ductwork connections |
Top or side |
|
Duct Diameter |
4 x150mm |
|
Condensate drain |
yes |
|
warranty |
5-year |
|
Country of manufacture |
UK |
|
Heat exchanger |
Counterflow heat exchanger (PVC) |
|
Available room sensors |
Humidity, Timer, Pir |
|
BMS - KNX |
Yes - BMS |
|
SAP Appendix Q |
Yes |
|
Fireplace mode |
No |
|
Alarm system integration |
Yes |
|
Passive House |
No |
|
ERP rating |
A |
|
SKU |
RHS -443028 LHS- 443028L |
| Ducting Kit Contents (150mm) | Part Number | 8 Point | 9 Point | 10 Point | 11 Point | 12 Point | 13 Point | 14 Point | 15 Point | 16 Point |
| 125mm metal extract valve | MW124 | 4 | 4 | 4 | 5 | 5 | 5 | 5 | 6 | 6 |
| 125mm metal supply valve | MW125 | 4 | 5 | 6 | 6 | 7 | 8 | 9 | 9 | 10 |
| 150mm pipework x 2 meter | P150-2 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| 150mm pipe connector | C150 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| 150mm 90' bends | B90150 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
| Metre foil backed glass fibre insulation | INS22 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
| 150mm - exterior grille s/steel louvered cowl | SSC150 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Standard 75mm x 50 meter regular radial duct (75mm) | RK75/50 | 2 | 3 | 3 | 4 | 4 | 4 | 5 | 5 | 6 |
| 90° Plenum with additional 350mm round pipe (Quiet-Vent) | QV75PLEN90 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
| Standard sealing ring (pack of 10) (75mm) | RL75 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 3 | 4 |
| QV 10 pt top entry distribution box 150 spigot (75mm) | QV75-10150TE | 2 | 2 | 2 | 2 | 2 | ||||
| QV 15 pt rear entry distribution box 150 spigot (75mm) | QV75-15180RE | 1 | 1 | 2 | 2 | |||||
| QV 10 pt rear entry distribution box 150 spigot (75mm) | QV75-10150RE | 1 | 1 | |||||||
| Quiet-Vent adaptor for distribution box 180-150 | QV-ADP180150 | 1 | 1 | 2 | 2 |
BPC have years of experience in delivering equipment around the UK and other Worldwide destinations. Our dedicated dispatch team work hard to ensure the highest standards are met so that your goods arrive on-time and in pristine condition.
Our market knowledge and experience allow us to match our service to meet your requirements swiftly and safely.
We offer free delivery on any order over £250 to any mainland UK or Ireland address
Worldwide delivery is possible on almost all our products at low costs, delivery to countries outside the EU are normally delivered to the nearest customs office, port or terminal for the purchaser to collect and complete custom clearance.
Please contact us to confirm shipping cost and availability.
End-To-End Support Delivery is available within 48-72 hrs, depending on method of transport, for hundreds of stock items.
Customers receiving a pallet delivery will be emailed on day of dispatch advising of delivery date. Parcel deliveries will be notified via email or SMS directly from DPD.
These checks are part of a unique commitment to building relationships with customers, understanding their specific delivery needs and responding to them positively and promptly.
Key components such as ductwork and fittings plus the most popular selling MVHR units are kept in stock in our UK-based warehouse, which means that you receive the best possible delivery dates.
All goods are expertly packed by a professional team so that your equipment is received in pristine condition ready for installation.
All deliveries co-ordinated to suit your specific requirements and construction programme.
We only use the couriers with the highest standard of service that include
Keep up to date with offers, products, and company news, direct to your inbox
By signing up, you agree to our privacy policy, terms & conditionsIf you would like to learn more about our installation service, please contact us:
Call us on 028 28 275 150 or click below to contact us online
If you are a developer or installer, apply for a trade discount online.
Click below for easy application
We are distributors and stockists of the leading ventilation products
