Vent Axia Kinetic BH Right Handed Unit - 443319
Vent Axia Kinetic BH Left Handed Unit - 443319L
The Lo-Carbon Sentinel Kinetic BH is the UKs bestselling heat recovery unit for people looking for a top quality unit at a realistic cost.with every feature imaginable and proven reliability from the leading ventilation company, you'll have total peace of mind when buying this outstanding heat recovery unit.
Suitable for houses up to 150 m2 and meets the latest requirements of the Building Regulations ADF and ADL for whole house system ventilation.
Optional complete system using Quiet-Vent Semi Rigid radial ducting that provides a quiet and professional installation complying with all building control requirements.
This heat recovery unit and Standard semi rigid radial ducting kit meets the highest and latest Building Regulation requirements and are suitable for newly constructed homes and renovation projects
Please call our sales team on 028 2827 5150 / +353 1526 7452 if you would like more information about upgrading your kit.
2 x G4 with the option of a M5 pollen intake filter
The Lo-Carbon Sentinel Kinetic models have 3 fully adjustable speeds and a purge setting (maximum flow). Provided with the unit is a digital controller that can be used to pre-set the speeds to any required airflow within the performance range
Boost can be achieved with almost any type of sensor or switch including momentary
The integral humidity sensor (models with H suffix) increases speed in proportion to relative humidity levels, saving energy and reducing noise.The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature
The outer enclosure is constructed of PVC with the inner body being constructed of EPP
The unit has 2 x low energy, high efficiency EC/DC motors
Spigot Options The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom of the unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation
In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation.
We recommend the use of Semi Rigid Radial ducting, Semi Rigid Duct is a perfect choice for MVHR Heat Recovery System Installations as it provides huge performance benefits whilst dramatically reducing installation time and installation risk on-site
We can also stock and supply Solid Rigid PVC, Galvanised Steel and Thermal EPP (foam) ducting if preferred
A heat recovery ventilation system is only as good as the ducting used
Following years of heat recovery design and installation BPC Ventilation are now able to provide high quality kits that will provide a quiet and efficient system exceeding building control regulations and are suitable for any competent person to successfully install
The Quiet-Vent radial semi rigid system combines the performance benefits of rigid duct and the installation benefits of flexible duct by treating each room individually with a dedicated 75mm duct run from two manifolds (distribution box) for supply and extract air at the heat recovery unit
Quiet-Vent Semi Rigid Duct is a perfect choice for MVHR Heat Recovery System Installations as it provides huge performance benefits whilst dramatically reducing installation time and installation risk on-site
|
Model |
Vent Axia Kinetic BH - 443319 / 443319L |
|
Heat Recovery efficiency % |
90% |
|
Digital Controller |
yes |
|
Boost Switch control |
Yes - Momentary |
|
Interactive control |
No |
|
Humidity control |
Internal and optional external sensor |
|
Airflow rate Max m3/h |
280 |
|
Airflow rate @ 100Pa m3/h |
245 |
|
Max dwelling size M2 |
150 (uk) |
|
Max room extraction |
Kitchen plus 4 extraction points |
|
Specific fan power (lowest) |
0.59 |
|
Dimensions W x H x D (mm) |
550 x 550 x 285 |
|
Weight |
15kg |
|
Filtration |
Yes 2 x G4 (optional 1xM5) |
|
Summer Bypass |
Yes |
|
Frost protection |
Yes |
|
Sound level @3m db.(a) |
16 to 39 |
|
Mounting |
Wall - Floor |
|
Ductwork connections |
Top - Sides |
|
Duct Diameter |
4 x125mm |
|
Condensate drain |
yes |
|
warranty |
5-year |
|
Country of manufacture |
UK |
|
Heat exchanger |
Counterflow heat exchanger (PVC) |
|
Available room sensors |
Humidity, Timer, Pir |
|
BMS - KNX |
Yes - BMS |
|
SAP Appendix Q |
Yes |
|
Fireplace mode |
No |
|
Alarm system integration |
Yes |
|
Passive House |
No |
|
ERP rating |
A |
|
SKU |
RHS -443319 LHS- 443319L |
Following years of experience in heat recovery systems, BPC Ventilation are now able to provide a range of high-quality kits that will provide a quiet and efficient system exceeding building control regulations and are suitable for any competent person to successfully install.
Our Quiet-Vent Radial Semi Rigid Ducting Kits combine the performance benefits of rigid duct and the installation benefits of flexible duct. They work by treating each room individually with a dedicated 75mm duct run from two distribution boxes (manifolds), for supply and extract air at the heat recovery unit.
Quiet-Vent Semi Rigid Ducting Kits are the perfect choice for installing a MVHR Heat Recovery System as they provide huge performance benefits whilst dramatically reducing installation time
Order online and purchase our Standard Kit or call our sales and technical teams on 028 2827 5150 / +353 1526 7452 to upgrade your kit.
As leading heat recovery specialists our in-house designers can provide a comprehensive and bespoke design backed up with our technical experts that can answer any queries you may have.
Free delivery is included to any mainland UK or ROI address on orders over £200. We are one of the few specialists that can provide quick or priority dispatch to any location using professional logistics companies, we are able to deliver to any other location on request.
If required all products in the kits can be changed or altered to suit your specific needs before dispatch and if you do require extra materials, we will supply these to you at the same highly discounted rates.
Any products not required can be returned for a refund (excluding return delivery cost & restocking fee).
All systems on completion of the installation require commissioning to insure it is working as intended, BPC have a network of commissioning engineers or we can supply you with a DIY air meter including a commissioning guide.
The systems have been painstakingly designed to be suitable for any competent person to install but we also have a large network of installers if required throughout the UK and Ireland if required.
Radial ducting is the latest innovation on ventilation systems and can provide a quieter and more efficient ventilation system compared to solid rigid ductwork.
All our radial ducting options are a system of individual smooth bore pipes which are crushproof, semi flexible with zero air loss. Our ducting has an anti-static and antibacterial lining which individually connects each room to a distribution box (manifold).
The distribution box takes mass airflow directly from the MVHR Heat Recovery Unit and allows lower rates to pass through to each individual room run eliminating noise transfer and increasing the efficiency of the heat recovery unit.
The radial ducting is designed to be installed below the loft insulation to provide a superior heat retention over pre-insulated solid rigid above the loft insulation.
Radial semi rigid ducting is suitable for any type of property; including timber framed houses, passive house approval homes and can be used in areas with limited access.
Our premium radial semi rigid ducting is available in both circular (75mm or 90mm) and oval (51mmx114mm) fittings.
As well as our radial ducting options, we can stock and supply Solid Rigid PVC, Galvanised Steel and Thermal EPP (foam) ducting if preferred.
| Ducting Kit Contents (125mm) | Part Number | 4 Point | 5 Point | 6 Point | 7 Point | 8 Point | 9 Point | 10 Point |
| 125mm metal extract valve | MW124 | 2 | 2 | 3 | 3 | 4 | 4 | 4 |
| 125mm metal supply valve | MW125 | 2 | 3 | 3 | 4 | 4 | 5 | 6 |
| 125mm pipework x 2 meter | P125-2 | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| 125mm pipe connector | C125 | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| 125mm 90' bends | B90125 | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
| 150mm to 125mm reducer PVC | R150125P | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Metre foil backed glass fibre insulation | INS22 | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
| 125mm exterior grille s/steel louvered | SSC125 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Standard 75mm x 50 metre regular radial duct (75mm) | RK75/50 | 1 | 1 | 1 | 2 | 2 | 3 | 3 |
| 90° Plenum with additional 350mm round pipe (Quiet-Vent) | QV75PLEN90 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| Standard sealing ring (pack of 10) (75mm) | RL75 | 1 | 1 | 2 | 2 | 2 | 2 | 3 |
| QV 6 pt top entry distribution box 150 spigot (75mm) | QV75-06150TE | 2 | 2 | 2 | 2 | |||
| QV 10 pt top entry distribution box 150 spigot (75mm) | QV75-10150TE | 2 | 2 | 2 |
BPC have years of experience in delivering equipment around the UK and other Worldwide destinations. Our dedicated dispatch team work hard to ensure the highest standards are met so that your goods arrive on-time and in pristine condition.
Our market knowledge and experience allow us to match our service to meet your requirements swiftly and safely.
We offer free delivery on any order over £250 to any mainland UK or Ireland address
Worldwide delivery is possible on almost all our products at low costs, delivery to countries outside the EU are normally delivered to the nearest customs office, port or terminal for the purchaser to collect and complete custom clearance.
Please contact us to confirm shipping cost and availability.
End-To-End Support Delivery is available within 48-72 hrs, depending on method of transport, for hundreds of stock items.
Customers receiving a pallet delivery will be emailed on day of dispatch advising of delivery date. Parcel deliveries will be notified via email or SMS directly from DPD.
These checks are part of a unique commitment to building relationships with customers, understanding their specific delivery needs and responding to them positively and promptly.
Key components such as ductwork and fittings plus the most popular selling MVHR units are kept in stock in our UK-based warehouse, which means that you receive the best possible delivery dates.
All goods are expertly packed by a professional team so that your equipment is received in pristine condition ready for installation.
All deliveries co-ordinated to suit your specific requirements and construction programme.
We only use the couriers with the highest standard of service that include
Keep up to date with offers, products, and company news, direct to your inbox
By signing up, you agree to our privacy policy, terms & conditionsIf you would like to learn more about our installation service, please contact us:
Call us on 028 28 275 150 or click below to contact us online
If you are a developer or installer, apply for a trade discount online.
Click below for easy application
We are distributors and stockists of the leading ventilation products
