Pipe ends are female and will accept male fittings such as bends and grilles.
Lengths of duct channel can be joined together using a male connector.
Easy to install and durable, just push-fit duct and fittings together.
Compatible with most other manufactures
Extensive range of fittings, outlets, and grilles available
Galvanised male coupling, used to join circular ducts or other female fittings
This version is supplied without 'safe' push fit seals
Fittings without safe seals should be joined using appropriate fixing methods
Our fittings are produced in accordance with DW144 with a zinc coating weight of 275g/m2, and have a rolled edge for safer handling and improved alignment
Description
Metal Male Duct Connector
Product Part Number
100mm Male Connector - C100MM
125mm Male Connector - C125MM
150mm Male Connector - C150MM
160mm Male Connector - C160MM
180mm Male Connector - C180MM
200mm Male Connector - C200MM
Description
Male fitting constructed of high quailty durable galvanised metal.
NOTE: Supplied without seals
Made in the UK
Perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans
Can be used to connect long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems.
Compatibility
Compatible with most other lead manufacturers for galvanised metal ducting
Performance
Solid rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or aluminium duct. Suitable to use in compliance with Part F Building Regulations.
Installation
To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape
Apply duct sealant to the male fitting
Push together
Apply aluminium duct sealing tape over joint
Alternatively, you can use self-sealing fittings that speed up the time taken by up to 70% and can be easily dismantled
Insulation of Ductwork
It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less.
This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space.
If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool
It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations
Available Sizes
100mm Male Connector
125mm Male Connector
150mm Male Connector
160mm Male Connector
180mm Male Connector
200mm Male Connector
Technical Specification
Male Duct Connector Technical Specification
Round System (mm)
100
125
150
180
200
Product Type
Ducting Connector
Ducting Connector
Ducting Connector
Ducting Connector
Ducting Connector
Length (mm)
100
125
150
180
200
Height (mm)
80
130
155
185
200
Width (mm)
100
125
150
180
200
Weight (Kg)
0.113
0.144
0.166
0.194
0.253
Temp Max (°C)
200
200
200
200
200
Product Code
C100MM
C125MM
C150MM
C180MM
C200MM
EAN - Barcode
5060586911263
5060586912925
5060586912932
5060586912949
5060586912956
Delivery
BPC have years of experience in delivering equipment around the UK and other Worldwide destinations. Our dedicated dispatch team work hard to ensure the highest standards are met so that your goods arrive on-time and in pristine condition.
Our market knowledge and experience allow us to match our service to meet your requirements swiftly and safely.
Free Delivery
We offer free delivery on any order over £100 to any mainland UK or Ireland address
Worldwide Delivery
Worldwide delivery is possible on almost all our products at low costs, delivery to countries outside the EU are normally delivered to the nearest customs office, port or terminal for the purchaser to collect and complete custom clearance.
Please contact us to confirm shipping cost and availability.
End-To-End Support Delivery is available within 48-72 hrs, depending on method of transport, for hundreds of stock items.
Customers receiving a pallet delivery will be emailed on day of dispatch advising of delivery date. Parcel deliveries will be notified via email or SMS directly from DPD.
These checks are part of a unique commitment to building relationships with customers, understanding their specific delivery needs and responding to them positively and promptly.
We deliver on Service
Key components such as ductwork and fittings plus the most popular selling MVHR units are kept in stock in our UK-based warehouse, which means that you receive the best possible delivery dates.
All goods are expertly packed by a professional team so that your equipment is received in pristine condition ready for installation.
All deliveries co-ordinated to suit your specific requirements and construction programme.
Delivery Partners
We only use the couriers with the highest standard of service that include
