Domus DX-CON - Multi Fan Remote Control
Optional remote controller DX-CON, designed to work the DX fan range and integral and remote sensors.
Features
Provides supply or extract variable speed
Automatic or manual switching of several fans
Economy speed setting 50%
On/off switches
Maximum or economy performance
Control
DX-CON can control several fans at one time from the same controller
Up to 5 6” fans
Up to 5 9” fans
Up to 2 12” fans
Do not mix fan sizes on the same controller
Installation
Mount the controller 1.5 meters from the floor
Do no expose to large amount of oil, grease or water
To install
- Lift panel and remove two screws
- Push out the backplate box cable entry using a screwdriver
- Spot through backplate box and drill and plug the wall. Flat the backplate box to the prepared wall
- Feed 20cm of the supply cable into the box
- Connect end of the cable into the control block, connect wires (see wiring diagram)
- If a security strap has been fitted, hook the lip of the security strap in hinge socket. Fit the control into the backplate box
- Secure installation
